 |
| Form
Factor |
|
| Dimensions |
- 12.0"
width x 9.6 " length , (30.5cm x 24.4cm), 6 layers
|
| |
|
| CPU |
- Single
LGA775 ZIF Socket
- Supports
a Quad-Core Intel® Xeon® 3300/3200
Series processor
- Supports
a Dual-Core Intel® Xeon® E3100/3000
Series processor
- Supports
a Intel® Core™2 Quad Q9000/Q6000
Series processor
- Supports
an Intel® Core™2 Duo E8000/E6000
Series processor
- Supports
a Dual-Core Intel® Pentium® E2000
processor
- Supports
an Intel® Celeron® 400 processor
|
| System
Bus |
- 1333
/ 1066 / 800 MHz system bus
|
| |
|
| Memory
Capacity |
- Four
240-pin DIMM sockets
- Supports
up to 8 GB of unbuffered, ECC/Non-ECC DDR2 800 / 667
MHz memory (Dual Channel)
|
| Memory
Type |
- DDR2
800 / 667 MHz unbuffered ECC / non-ECC SDRAM, 240-pin
gold-plated DIMMs
|
| DIMM
Sizes |
-
256 MB, 512 MB, 1 GB, 2GB, 4GB
|
| Memory
Voltage |
|
| |
|
| Chipset |
- Intel
3210 chipset
- ICH9R
SB + PXH-V + Intel® 82573V + Intel®
82573L
|
| Serial
ATA |
- Intel®
ICH7R SB SATA controller built-in for 4 SATA (3 Gbps)
- RAID
0, 1, 5, 10 support (Windows Only)
- RAID
0, 1, 10 support (Linux)
|
| Network
Controllers |
- 1x
Intel® 82573V Gigabit PCI-Express Ethernet
- 1x
Intel® 82573L Gigabit PCI-Express Ethernet
- Supports
10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
|
| VGA |
- On-board
XGI Z7 graphics, 16MB
|
| Super
I/O |
|
| Clock
Generator |
|
| |
|
| Serial
ATA |
- Four
Serial ATA ports (3.0 Gbps performance)
- Four
SATA hard drives supported
|
| IDE |
-
One EIDE channel supports up to two UDMA IDE devices
- IDE
Master / Slave
- Supports
UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1
Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 6x
USB 2.0 compliant / 1.1 compatible
- 2x
internal USB headers for 4 ports
-
2x USB Rear Ports
|
| VGA |
|
| Keyboard
/ Mouse |
- PS/2
keyboard and mouse ports
|
| Serial
Ports |
- 1x
Fast UART 16550 serial port
- 1x
Header (Optional cable req'd.)
|
| Parallel
Port |
- 1x
Parallel Port Header(Optional cable req'd.)
|
|
 |
|
| PCI |
- 5x
32-bit 33MHz PCI (5V) slots
|
| PCI-X |
-
1x 64-bit PCI-X 133MHz Slot
|
| PCI-Express |
|
| |
|
| BIOS
Type |
- 8Mb
Flash EEPROM with Phoenix BIOS®
|
| BIOS
Features |
- Plug
and Play (PnP)
- DMI
2.3 support
- PCI
2.2
- ACPI
1.0 (limited)
- USB
Keyboard support
- SMBIOS
2.3
- PECI
|
| |
|
| Software |
- Optional
IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor
III
- Watch
Dog
- W83793
Hardware Monitor
|
| Power
Configurations |
- ACPI
Power Management
- Main
Switch Override Mechanism
- Wake-On-Ring
(WOR) header
- Wake-On-LAN
(WOL) header
- Power-on
mode control for AC power loss recovery
- Internal/External
modem remote ring-on
|
| |
|
| CPU |
- Monitors
for CPU Cores,Memory +1.8V, Chipset +1.5V, VIT FSB,
+3.3V, +5V, ±12V, 3.3V Standby, +5V Standby,
VBAT
- CPU
Core 3-Phase-switching voltage regulator with auto-sense
from 0.8375V-1.6000V
|
| FAN |
- Total
of six 4-pin fan headers
- 6
fans with tachometer monitoring
- Status
monitor for on/off control
- Status
monitor for speed control
- Low
noise fan speed control
- Support
3-pin fans (without speed control)
- Pulse
Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring
for CPU and chassis environment
- CPU
thermal trip support
- Thermal
Monitor (TM2) Support
- PECI
|
| LED |
- CPU
/ System Overheat LED
- Standby
Voltage Alert LED
|
| Other
Features |
- Chassis
Intrusion Detection
- Chassis
Intrusion Header
|
| |
RoHS
|
- RoHS
Compliant 6/6, Pb Free
|
| Environmental
Spec. |
- Operating
Temperature: 10°to 35°C (50°to 95°F)
- Non-operating
Temperature: -40°to 70°C (-40°to 158°F)
- Operating
Relative Humidity: 8% to 90% (non-condensing)
- Non-operating
Relative Humidity: 5 to 95% (non-condensing)
|
|
| FCC |
- Passed
to meet FCC standard requirement
|
|
